AUTHOR Alarm Kvant 231, Operating Manual

Page: 29 / 40

29
REFERENCE
The KVANT Immobilizer options
The value of the particular option set in the system
defined by default (ON/OFF) is colored in gray in the
table below. The figures in the table show the number
of the service/valet button pushes in order to choose
the particular option value.
№ Option OFF ON
2 Accelerometer sensor sensitivity 1 2...5
3 Ignition block 1 2
4
Hood end switch 1
AT block 2
5
Smartphones attaching 2
Key fobs attaching 3
Two-step authorization (authentication) 4 *
Smartphone as a key fob 6 *
Smartphones deleting 7**
Key fobs and smartphones deleting 8**
6 The STM firmware change mode
7 The nRF firmware change mode 7
9 Factory settings 9
* See «Settings».
** In order to confirm the key fob/smartphone deleting procedure, press
the service/valet button seven or eight times respectively.
In order to change the option value, do the next:
1. Switch ON the ignition without starting the engine.