Kingsley-Bate
NT18 Nantucket Bar Chair
Assembly Instructions
Page 1: ...Kingsley Bate NT18 Nantucket Bar Chair Assembly Instructions ...
Page 2: ...ortise holes until all joints fit snugly together Make sure that the numbered tenons correspond with the numbered mortise holes STEP III Carefully fit the remaining LEFT END FRAME mortise holes over all exposed tenons If necessary you may use a rubber m allet or a regular hammer with the sanding block between the hammer and the wood gently drive all the mortise holes onto the tenons until joints f...
Page 3: ...o pre drilled holes of the SEAT and the BACK as shown in assembly pictures insert screws through BACK ST RETCHER and into the BACK with a proper hand held screwdriver NOTE DOWEL USED FOR COVERING SCREW HOLE IN BACK STRETCHER STEP VIII Carefully hammer the plugs into the BACK STRETCHER to cover the screw holes Again if the plugs are not com pletely flush just sand away the excess with the sanding b...
