7
8
1) Use the
UP/DOWN
scroll buttons to select
Keyboard Test
from
the System Setup menu, and then press the
Y
button.
Display Test
System Setup
1) Contrast
2) Display Test
3) Keyboard Test
Display Test
Press [Y] to test.
Look for missing
spots in characters.
Press <N> to return.
Keyboard Test
3) Press the
Y
button to save your selection and return to previous
menu.
4) Press the
N
button to return to previous menus.
The Display Test is used to check the LCD display.
1) From the
System Setup
menu, use the
UP/DOWN
scroll buttons
to select Display Test and press the
Y
button.
2) Select
Display Test
from the
Display Test
menu and press the
Y
button.
3) Press the
Y
button again to start test. Look for missing spots in
the solid black characters.
4) When completed, press the
N
button to return.
The Keyboard Test is us ed to verify that the keys are functioning
properly.
2) Display Test
3) Keyboard Test
Press any key to
Start test to
display name.
Key:
Double [N] to Return
2) Press any key to start test. When you press a key, the key name
should be o bserved on the display. If the name does not sho w up,
then the key is not functioning properly.
3) Double press
N
to return to the previous menu.
2.8 Vehicle Coverage
The VAG Scanner is specially designed to work with most
Volkswagen and Audis sold worldwide of 1990 or newer models.
If a VW / AUDI has a 16-pin
OBD - II style
Data Link Con-
nector (DTC), the code reader will certainly work. If it has an old-
style 2x2 Data Link Connector (DTC), then it depends on whether
there are 4 or 3 wires connecting to the pins. If there are 4 wires,
each connecting a pin, then it will work. If there are only 3 wires,
leaving one pin disconnected, then it will not work.
For VW/AUDI with old-style 2x2 Data Link Conneetor (DTC),
you need to have a 2x2 cabling adapter which is not included
in this product package.
