57
Calibration must always be carried out after the following operations:
Steering wheel replacement
Steering angle sensor replacement
Any maintenance that involves opening the connector hub from the
steering angle sensor to the column
Any maintenance or repair work on the steering linkage, steering gear
or other related mechanism
Wheel alignment or wheel track adjustment
Accident repairs where damage to the steering angle sensor or
assembly, or any part of the steering system may have occurred
1. AUTEL accepts no responsibility for any accident or injury arising from
servicing the SAS system. When interpreting DTCs retrieved from the
vehicle, always follow the manufacturer’s recommendation for repair.
2. All software screens shown in this manual are examples, actual test
screens may vary for each test vehicle. Pay attention to the menu titles
and on-screen instructions to make correct option selections.
3. Before starting the procedure, make sure the vehicle has ESC button.
Look for the button on dash.
Using
BMW
as an example.
1. Tap the
Service
application button from the MaxiPRO Job Menu.
2. Tap
SAS
button and wait for the vehicle manufacturer screen. You can
tap
VIN Scan
or the vehicle make to acquire vehicle VIN information and
tap
Yes
to confirm. See
Vehicle Identification
on page
20
for detail.
3. Tap the desired function in the
SAS
function list. The list may vary by
test vehicle.
NOTE