13
7
I/M Readiness
This function is used to check the readiness of the monitoring system. It is
an excellent function to use prior to state emissions inspection. The MaxiAP
AP100 can determine if the vehicle will pass, fail or may pass but the
required readiness monitors have not been set.
Launch the MaxiAP app and tap
I/M Readiness
to scan the inspection and
maintenance monitors and display the results with two sub menus:
Since DTCs Cleared
– displays the status of monitors since the last
time the DTCs are erased.
This Driving Cycle
– displays the status of monitors since the
beginning of the current drive cycle.
Tap the button on the top right of the screen to view the explanation of
the different indicators in front of each monitoring system.
Figure 7-1
Sample I/M Readiness Screen
