16
u
If the brake tool fails to communicate with the vehicle
’
s
ECU (Engine Control Unit), a
“
LINK ERROR!
”
message
shows up on the display.
ü
Verify that the ignition is ON;
ü
Check if the brake tool
’
s OBD II connector is securely
connected to the vehicle
’
s DLC;
ü
Turn the ignition off and turn it back on 10s later.
u
If the
“
LINK ERROR!
”
message does not go away, then
there might be problems for the brake tool to communicate
with the vehicle. Contact your local distributor or the
manufacturer
’
s customer service department for assistance.
3)
To exit the SBC test, press
N
button from
Select Function
menu,
and a prompt comes up asking your confirmation.
4)
Press
Y
button to confirm if you do wish to exit; if you do not
wish to return, press
N
button or use
UP/DOWN
button to select
NO
and then press
Y
button to continue.
A. Reading Codes
1)
Use
UP/DOWN
button to select
Read Codes
from
Select
Function
menu
and press
Y
button to confirm.
.....
Select Function
1/7
►
1) Read Codes
2) Erase Codes
3) Deactivate Brake
4) Activate Brake
............ .
Exit Test
........... ...
Exit SBC Test!
Are you sure?
YES
NO
