12
- Check if the brake tool
’
s OBD II connector is securely
connected to the vehicle
’
s DLC;
- Check that the park brake is released;
- Turn the ignition off and turn it back to on 10s later;
- Repeat the process.
l
If the
“
Deactivation Failed!
”
message does not go away,
then contact your local distributor or the manufacturer
’
s
customer service department for assistance.
3)
Press any key or wait a few seconds to return to previous menu.
D. Activate Brake
WARNING:
The EPB system must be activated after finishing the
maintenance/service work on the brakes.
Make sure the vehicle is properly blocked after deactivation of the
system.
1)
To close the brake pads after finishing the maintenance/service
work on the brakes, use
UP/DOWN
button to select
Activate
Brake
from
Select Function
menu and press
Y
button.
2)
Wait a few minutes while the device is activating the brakes.
When they are activated successfully, following screen shows:
……………
Activate Brake
……
.. .
Activation Done!
Go to Adaptation?
YES
NO
........
Select Function
...... ...
4/5
1) Read Codes
2) Erase Codes
3) Deactivate Brake
►
4) Activate Brake
