Intelligent flight battery function
The intelligent flight battery has the following functions:
Storage self-discharge protection
If the battery is stored in a high temperature environment or is not used for 6 days and has a high
charge, the self-discharge protection will be activated. The battery will automatically discharge to a
safe level. This is the default setting, and the discharge process takes 2-3 days. Although the
battery has no indication during the self-discharge cycle, you will notice that the battery slightly
heats up, which is normal. The discharge threshold can be customized using Autel Voyager.
Low power protection
If the battery power is low, the battery will automatically enter sleep mode to prevent over-dis-
charge. In this mode, the battery does not respond when you press the power button. To wake up
the battery, connect it to a charger.
Charging temperature detection
If the temperature is lower than 5°C (41°F) or higher than 45°C (113°F) during charging, the battery
will stop charging.
Overcurrent protection
If the charging current exceeds 16A, the battery will stop charging.
Overcharge protection
When the battery is not in use, the battery will automatically cut off the power output function after
the self-discharge cycle is completed. This function is disabled during flight.
Balance protection
The voltage of each battery cell is kept balanced to prevent overcharging or over discharging.
Over discharge protection
When the battery is not in use, the battery will automatically cut off the power output function after
the self-discharge cycle is completed. This function is disabled during flight.
Short circuit protection
Once a short circuit is detected, the power supply will be cut off.
Power saving mode
If there is no operation for 30 minutes, the battery will shut down.
Communication
When in use, the aircraft will maintain synchronization with the battery to provide real-time informa-
tion, including voltage, capacity, current, and temperature.
Ultra-low energy consumption mode
To save power, this mode will be activated when the battery is low and has not been charged for 1
day. After connecting the charger, the battery will resume normal functions.
