49
TIPS
To terminate the
Waypoint
mission at any point, perform one
of the following actions:
• Regain control of the aircraft by sliding the
Flight Mode
Switch
on the remote controller to
ATTI
position. (Only
available when
ATTI
is enabled on the app) The aircraft will
terminate the mission and respond to the remote controller.
• Press (
) on the remote controller and hold for 2 seconds.
The aircraft will terminate the mission and land at the home
point.
• Push the
Ascen
t stick to the position of 90% in range and
hold for 2 seconds. This is the same with the method to
regain control of the aircraft during
Go Home
. (
31)
Settings
Tapping the Settings icon (
) on the
General Informaton Bar
allows you to
adjust 6 categories of settings displayed on this menu, including
Flight Control
Settings
(
),
Remote Controller Settings
(
),
Video Link Settings
( ),
Aircraft Battery Settings
(
),
Gimbal Settings
(
) and
General Settings
(
).
z
Flight Control Settings
In
Flight Control Settings
, you can manage the following settings:
1.
Compass Calibration
( 23)
2.
Beginner Mode
Slide this button to enable or disable
Beginner Mode
. This mode has
a fixed maximum flight altitude (30m), distance (100m) and speed
(horizontal: 6m/s, ascent: 4m/s, descent: 1m/s) designed to keep
beginners’ flights safe.
NOTE
When
Beginner Mode
is activated, the motors cannot be
started in non-GPS mode.
3.
Flight Speed
Set a horizontal speed when
Beginner Mode
is disabled. (default: 15m/s)
4.
Altitude Limit
Set a maximum altitude for your flight when
Beginner Mode
is disabled to
