37
12. Firmware Update
To ensure users have a premium operating experience, Autel
Robotics will
update
firmware
when necessary. You can refer to the
following steps to upgrade.
1. Power on the controller
and
make sure it is
connected
to the
internet.
2. Run Autel Explorer App. A pop-up will appear when new
firmware
is available. Tap the notification to enter the update interface.
3.
Update
will start automatically after
downloading
the latest
firmware. Please restart the controller when the update is com
plete.
13. Specifications
Image Transmission
902-928MHz
（
FCC
）
2.400-2.4835GHz
5.725-5.850GHz
（
Non-Japan
）
5.650-5.755GHz
（
Japan Only
）
*Operating Frequency
Max Signal Transmission
Distance(No interference,
No obstacles)
Note
B
efore
upd
ating, please make sure the controller battery is
above 50%.
If the network is
di
sconnecte
d
du
ring the
fi
rmware
downlo
a
ding
,
the upgra
d
e will fail.
The
upd
ate takes approximately 15 minutes. Make. Please wait
patiently.
FCC
：
15km CE
：
8km
