8.2 Adjust the Antennas
Unfo
ld
the controller antennas a
nd
a
dju
st them to the optimal
angle. The signal strength varies when the antenna angle is
differe
nt. When the antenna a
nd
the back of the controller are at
an angle of 180° or 270°, a
nd
the antenna surface is facing the
aircraft, the signal
qu
ality between aircraft a
nd
controller will
reach the optimal c
ondi
tion.
9. Pair the Frequency
34
���
o
���
o
Note
To a
void
controller signal interference, please
d
o not use other
communication e
quip
ment with the same fre
qu
ency ba
nd
at the
same time.
During operation, the App will prompt the user when the image
transmission signal is poor.
Adju
st the antenna angles accor
ding
to the prompts to ensure the controller a
nd
aircraft have the
best communication range.
1. Press (short press) the linking button next to the USB port on the
right side of the aircraft body to put the aircraft into the linking
mode.
2. Power on the Smart Controller and run the Autel Explorer app,
enter the mission flight interface, click the gear icon in the upper
right corner, enter the settings menu, click "remote control -> data
transmission and image transmission linking> start linking", wait a
few seconds until the data transmission is set correctly and the
linking is a success.
