Propeller
Schematic
diagram
Matching
machine arm
7
8. Install the propeller
The propeller has been installed on the aircraft by default. If you need
to re-install it, please refer to the following instructions. Note that the
propeller must be intact and firmly installed on the aircraft, and the
propeller marked with a dot must be correctly matched to the arm.
·
Install the propeller
（
1
）
Confirm that the aircraft is turned off.
（
2
）
Choose the propeller that matches the arm.
（
3
）
Align the hole of the propeller with the screw hole of the
motor, and lock the screw.
• Disassemble the propeller
（
1
）
Turn off the aircraft.
（
2
）
Loosen the screw to remove the propeller.
Without dots mark
Mounted on the
arm without dots
With dots mark
Mounted on the
arm with dots
Summary of Contents for EVO Nano Series
Page 1: ...Quick Start Guide ...
Page 2: ......
Page 15: ......
Page 16: ...WWW AUTELROBOTICS COM AUTEL ROBOTICS CO LTD ALL RIGHTS RESERVED ...
