22
5. Mount the Gimbal
1. Pinch the tail of the vibration absorber with your thumb and index finger and lift
the gimbal. Slide the gimbal downwards and forwards along the slot of the
gimbal compartment in a straight line.
Important:
Make sure that the ring at the front of the gimbal is aligned with the two pins in
the gimbal compartment at the nose of the aircraft.
Make sure that the gimbal is at the same height as the slot of the gimbal
compartment.
2. Insert the connector cable port into its slot and gently push it to the end. Place
the cover on the top of the gimbal compartment and re-tighten the cover with a
cross screwdriver.
