23
GPS mode
When the aircraft detects an appropriate GNSS signal, it will activate the
GPS mode
. With the assistance of the
forward
and
downward vision
systems
, GPS can locate and avoid obstacles, provide stable and smooth
flight control, and support safety functions such as
return
,
fail-safe
, etc.
ATTI mode
When the GPS signal is weak and the light conditions cannot meet the
vision system, the
ATTI mode
is activated. The obstacle avoidance
function is disabled, and the altitude of the aircraft is controlled only
through its barometer.
Starpoint mode
In this mode, the aircraft works in the
visual positioning mode
, but the
environment and height are highly required. The environment must meet
the lighting conditions, that is, it must be bright and the ground texture
must be clear, and regrading height, the aircraft works in a vision module
capability range, and the aircraft enters the ATTI mode over the height.
2.1.6 Intelligent flight features
Auto return
The return function is enabled only when there is good GPS signal. To enable the auto return
function manually, long press the return button (Go Home) (
) on the remote controller for 3s.
Upon receipt of the instruction, the aircraft will automatically return and land on the preset return
point.
EVO II Enterprise can use its forward vision system to detect and avoid the obstacles on the flight
course. When the aircraft is in the return state, the function of the remote controller are disabled,
you can activate it by pressing the Pause button (
).
Warning
If the
forward vision system
is not enabled during
return
, the aircraft cannot automatically avoid
obstacles, press the
pause button
(
) on the remote controller to exit the automatic
return
function to recover the control on the aircraft.
Important
The return altitude is 30 m by default. If you activate the return function when the aircraft is
below this altitude, the aircraft will rise to 30 m before performing return.
If the auto return function is activated within a radius of 10 m of the return point, the aircraft
will land automatically.
Fail-safe
The fail-safe function is to help EVO II Enterprise UAVs to return automatically or land at its
Summary of Contents for EVO II Pro Enterprise
Page 1: ...1 EVO II Enterprise User Manual ...
Page 26: ...26 ...
