43
dropped on the ground
, or the aircraft’s flight direction does not match control
inputs), it is recommended to calibrate the remote control. You can calibrate the
remote control by using the
Autel Explorer™
app (for details, see the
App
Manual
) or according to the following steps.
1.
Turn off the remote control. Press and
hold the
Power Button
(
) and
Take-off/Landing Button
( )
simultaneously until the screen
appears as shown on the right. The
four crossed bars represent the left
and right
Command Sticks
. The
horizontal bar at the top is the
Gimbal
Pitch Dial
.
2.
Release both
Command Sticks
and
the
Gimbal Pitch Dial
naturally to the
central position. The three middle
rounds
on
the
remote
control
calibration screen will be highlighted
successively.
3.
Push and hold the
Command Sticks
in each of the eight possible directions
until you hear a beep each time. Then,
turn the
Gimbal Pitch Dial
clockwise
until you hear a beep, and then
counterclockwise until you hear a
beep.
4.
Calibration is completed when all the
bars on the screen are highlighted.
3.2.4 Pairing the Aircraft & Remote Control
The remote control and aircraft come paired out of the box. When you need to
pair them again
— such as after pressing the
Remote Control Pairing Button
on the aircraft
— follow these steps: