5
Do not fly in dangerous situations or severe weather conditions such as tornadoes, rain, hail
and snow.
Fly in an open and safe area. Stay away from obstacles that may interfere with GPS signals,
such as buildings and trees.
Be extremely careful when flying above 6000 m (18,000 ft),Performance of the battery and
power system of the aircraft may be affected at high altitudes
Pre-flight
Before the UAV flies, it is always necessary to pay attention to the following matters:
The remote controller, flight battery should be fully charged.
The propellers must be correctly installed without damage.
All parts of the aircraft must be completely installed.
The motor, gimbal and camera must work normally after the aircraft is powered on.
All warnings and errors displayed on Autel Voyager must be handled.
Only use accessories provided with this aircraft or sold or authorized by Autel Robotics.
Using unapproved accessories can bring serious safety risks and will invalidate the product
warranty.
In-flight
The aircraft must keep away from people, vehicle and other moving objects during takeoff
and landing.
Do not cancel the auto return process in the event of a low battery alarm. Otherwise the
aircraft may not return to the return point due to insufficient power.
When Autel Voyager displays an alarm, immediately carry out the operation according to
relevant specification.
Do not operate the aircraft if you have any physical condition that may affect safe operation,
including but not limited to dizziness, fatigue, intoxication, or high blood pressure.
Warning
If any part of the aircraft or the remote controller fails to work normally or is visibly
damaged, please do not fly any longer and contact the Autel Robotics customer service team:
www.autelrobotics.com/page/contact
Storage and maintenance
Carefully check each part of the aircraft after any collision or extrusion. Store the aircraft and its
accessories out of the reach of children and pets.
Store the aircraft and its accessories in a cool and dry place.
Keep the aircraft away from water and heat sources.
The aircraft’s recommended storage temperature is between 22°C and 28°C (72°F to 82°F).
The Autel Robotics customer service team is always ready to provide assistance via chat, mobile
phone or email (
).
