manualshive.com logo in svg

Autech Technology NanoPC, User Manual

Share
Download
Autech Technology NanoPC User Manual Download Page 49

43

INSTALL OS

11. When the installation is complete, setup will prepare your computer for it’s first use. You can then 

 

   follow the steps to select system settings, create an account, set a password...etc, until the whole  
   process is completed.

4-2 Install Drivers

1.  When the Windows 8.1/Windows 8/Windows 7(64 bit) is completely installed, you have to install the  
  necessary drivers before using the NanoPC. Connect the NanoPC USB Flash Disk to your system.

2.  Waiting for a few seconds, the main menu will be displayed on the screen. 
              

3.  Use these options to install all the drivers for your system. You must click "Intel Chipset Driver" to  
  install it first. After that, you can click ”One Click Setup” and then choose the items you want to install,  

  or you can click on each individual driver to install it manually. When you install the driver of Windows  

  7(64bit) OS, you need to install it manually under the path: Driver \ Intel \ TXEpatch TXEpatch.

4.  After installing all the drivers, you need to restart your NanoPC, then you can start using it.

Summary of Contents for NanoPC
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands