English
Page 22
LIMBS0U3-00_eng.fm
AC b
a
tt
er
y
cha
rger
EN
Instructions for use
Battery charger MBC825A can only recharge MBM06MH bat-
teries: if it is used in a different way, it is used improperly
and dangerously. Autec shall not be held liable for conse-
quences due to improper, wrong or irrational use.
AC battery chargers have two signalling lamps:
To recharge a battery:
1.connect the battery charger to the AC mains (the POWER light
switches on)
2.insert the battery in its proper housing in the battery charger.
The CHARGE light switched on indicates that recharging has started.
3.wait until the battery is completely charged (the CHARGE light
goes off)
4.remove the battery. If the battery is not removed at the end of the
recharging process, the charger switches to trickle charging.
5.disconnect the battery charger from the AC mains (the
POWER light switches off)
CHARGE LIGHT (YELLOW)
MEANING
Off
The battery is fully charged or is not
inserted
Blinking
(when inserting the battery)
The battery is completely discharged
Steady on
The battery is being recharged
POWER LIGHT (GREEN)
MEANING
Off
The battery charger is not powered
On
The battery charger is powered
