User Instructions for PRLCD Remote
Technical Sales / Customer Service:
+1-818-338-
7788 • Email:
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA •
www.autec.com
6 / 11
3.4
: Input parameters
Method as follows:
1.
Before setting parameters please make sure already connected with
controller(Solar Charger/Driver). The remote should be in the range of
the
sensor, otherwise it won’t set properly.
See Image 3-10.
2.
Important: Align top of remote with IR receiver sensor on the
controller(Solar Charger/Driver). After LCD shows successful set up of
parameters, press
”
“, then you will hear
a tone, which will indicate
the controller(Solar Charger/Driver) is successfully programmed with the
new settings.
Image: 3-
7 Enter “Settings”
Image: 3-9 Setting Successful
Image: 3-6
Choose “SysConfig”