User Instructions for PRLCD Remote
Technical Sales / Customer Service:
+1-818-338-
7788 • Email:
31328 Via Colinas Suite 102 • Westlake Village, CA 91362 USA •
www.autec.com
3 / 11
1.
Product Overview
PRLCD remote is used for reading and setting parameters for the Autec Power systems series LSDCMPPT. Please verify
the PRLCD model version before setting the parameters. Requires 2AA batteries, batteries not included.
2.
Button Instruction
LCD Display
: Displays all data
Power Button:
Press once to power on LCD display. To power off hold down button for two seconds.
Up Button:
Press once to move the cursor up, and increase the numbers; holding the button down longer will
increase the speed.
Sending Button:
After setting parameters, press this button, new data will be sent to the system and
LCD display will show success when the highlight disappears.
Signal Shutdown Button
: Press to set the controller into sleep mode.
Confirm Button
: When setting parameters, press this button to select and edit the desired parameter.
To confirm press button again to exit edit mode.(Highlight will disappear)
Test Button:
Use this button to text system function.(If all is working well the LED will illuminate)
Down Button:
Press once to move the cursor down, and increase the numbers; holding the button down longer
will increase the speed.
Return Button
: Press to return to home screen.