Operating manual Pallas Back
EN
9 | Installation
23
Fig. 8:
Lifting the rear panel upwards and re-
moving it
2) Lift the rear panel upwards and remove it.
Fig. 9:
Removing the prefitted screws
3) Open the door of the baking compartment.
4) Remove the prefitted screw from the inside of the bak-
ing compartment (left and right) with an Allen key (SW
2.5).
Fig. 10:
Mounting the side cladding
5) Use the cross-point screwdriver and the self-tapping
screws provided to mount the side cladding on the
unit.
6) Repeat the steps to mount the side cladding on the
left side.
7) Reattach rear panel and lids.
