Operating manual Clou Compact 2.0
EN
10 | Settings
31
10
Settings
10.1 Aligning the stove
Fig. 37:
Aligning the stove
1) First the cover and the side cladding must be de-
tached.
Proceed , as described in the section Removing
the side cladding [
}
on page 21].
2) There are two screw on the back of the stove. These
can be used to align the stove.
ð
When doing so take note of the type of floor.
Should the floor under the stove be made of tiles,
wood, laminate etc., the floor can be damaged.
10.2 Adjusting the door
1) Only the left side rear cladding needs to be removed
to adjust the door. Proceed as described in the sec-
tion Removing the side cladding.
Fig. 38:
Undoing the screws
2) Opening the door
3) Undo the screws from the top front trim.
