6
Id. no.: 242440-7
STANDBY ENERGY CONSUMPTION
If a water heater is heated up and no water is released for a long time after the heating process, a cooling
of the stored water via the surface of the device, albeit gradual but continuous, will be the result.
The intensity and speed of his cooling off will vary according to the construction type of the device, the
size of the device, thickness and quality of the container insulation.
This behaviour is measured at a stored water temperature of 65°C over a period of 24 hours and the
amount of energy required to keep the water at a constant temperature throughout this period is meas-
ured in kWh.
Nominal capacity in litres
80
100
120
150
Standby energy consumption
kWh/24h
0.95
1.08
1.23
1.45
OPERATING THE ECO CLEVER CONTROL SYSTEM (LCD VERSION)
Operation
The LCD controller has 3 push buttons which can be used to select the desired operating
mode.
This button is used used to select between the 3 different operating modes.
Press the Mode button once or multiple times to select the desired mode – the desired func-
tion appears on the display.
By pressing and holding down this button for at least 3 seconds, the device can be switched
on or off.
Clever
This mode is used for saving energy effectively. The controller adjusts to the user’s behaviour
and heats up the water only when it is needed.
Manual
In this mode the hot water temperature is constantly adjusted to the comfort level which is
selected.
Holiday / Standby
In this mode the tank does not heat-up the water over a set period, unless the water temper-
ature falls below 7°C.
mode-selecting
operation mode
child lock
maintenance and error indicator
buttons to select
level of comfort and
holiday days
holiday days or
error code
Summary of Contents for eco clever 100
Page 23: ...Id no 242440 7 23 NOTES...
