PAG E 4
D I G I PAG E 8 M / D I G I PAG E 1 6 M I N S TA L L AT I O N & O P E R AT I O N M A N UA L
C O N T R O L S
Z O N E S E L E C T
These buttons allow selection of zones for paging. When selected,
the adjacent LED glows green. Pressing the button again
deselects the zone. The area next to the button is for labelling the
zone. Selecting a zone does not instigate paging. See 4. ZONE
PAGE.
C L E A R
This button clears all the selected zones.
A L L PAG E
This button pages to all zones. It is momentary so must be held
while talking into the microphone. It activates the microphone
and mutes the program sources. It does NOT clear the current
zone selection configuration so the paging station will return to
its previous state (selected zones) once the ALL PAGE button
is released.
Z O N E PAG E
This button pages to the current zone selection configuration as
indicated by the ZONE select LEDs. The zones being paged have
their program sources muted and the microphone becomes active.
If no zones are selected the system will still show as busy when
this button is pressed.
B U S Y
This LED glows when the network or system is busy. This can
be caused by the local paging station (you are making a page),
another paging station, or a remote control panel being in use.
Paging is not possible while the system is busy, however zone
selections can still be made.
5
2
3
4
1
1
2
3
4
5
