AMISDI1
Passive Direct Injection Box
Introduction
The Australian Monitor Installation Series DI1 is a passive direct injection
box that features a balanced XLR output, a 6.35 mm TRS through output, 3
stage pad offering up to 40dB of attenuation & a ground lift switch for
hum elimination. As part of the AMIS Contractor Tools range, the AMIS DI1
is an inexpensive passive DI that is integral to a wide variety of installations.
Description
•
6.35mm TRS Jack Input:
This will accept balanced or unbalanced
signals from a program source or instrument.
•
6.35mm TRS Jack Thru Output:
This balanced output allows for a
direct output link to an instrument amplifier.
•
3 Stage input Pad:
This 3 stage switch allows 0dB, 20dB or 40dB of
input attenuation so differing sources can accommodated.
•
GND Lift Switch:
When this switch is in “ground” position pin1 of both
the input & the output are connected. When this switch is in “lift”
position these grounds are separated. This switch is used to
eliminate hum that may be present.
•
Balanced XLR Output:
This balanced XLR output is for connection to
a mixing console, signal processor etc.
Specifications
Attenuation
Switch:
0dB, 20dB or 40dB selectable
Frequency
Response:
15Hz-30kHz
Dimensions:
74mm x 45mm x 130mm
Weight:
650g
Summary of Contents for AMIS DI1
Page 2: ......
