background image

Engineered by Audio Telex Communications Pty Ltd, Sydney, Australia

A.B.N. 78 001 345 482 Inc in NSW

Sydney (NSW & ACT Sales)

Private Bag 149, Silverwater NSW 1811
149 Beaconsfield Street, Silverwater NSW 2128
Ph: (02) 9647 1411
Fax: (02) 9648 3698
E-mail:  [email protected]

Melbourne (Vic & Tas Sales)

P.O. Box 131, Blackburn South VIC 3130
22/277 Middleborough Road, Box Hill VIC 3128
Ph: (03) 9890 7477
Fax: (03) 9890 7977
E-mail:  [email protected]

Brisbane (Qld Sales)

P.O. Box 871, Fortitude Valley QLD 4006
42 Commerical Road, Fortitude Valley QLD 4006
Ph: (07) 3852 1312
Fax: (07) 3252 1237
E-mail:  [email protected]

Adelaide (SA & NT Sales)

P.O. Box 157, Hindmarsh SA 5001

31 Walsh Street, Thebarton SA 5031

Ph: (08) 8352 4444

Fax: (08) 8352 4488

E-mail:  [email protected]

Perth (WA Sales)

P.O. Box 404, North Perth WA 6906

299 Fitzgerald Street, West Perth WA 6005

Ph: (08) 9228 4222

Fax: (08) 9228 4233

E-mail:  [email protected]

Auckland (NZ Sales)

P.O. Box 512, Albany 1331

Unit B, 11 Piermark Drive, Albany 1331

Ph: (09) 415 9426

Fax: (09) 415 9894

E-mail:  [email protected]

Export Sales & Corporate Head Office

Private Bag 149, Silverwater NSW 1811

149 Beaconsfield Street, Silverwater NSW 2128

Australia

Ph: 61-2- 9647 1411

Fax: 61-2-9748 2537

E-mail:  [email protected]

www.audiotelex.com.au

Summary of Contents for ACM250P







Reviews: