7
TO INSTALL JUMP SEAT: Expand stroller to
intermediate or fully expanded position.
Refer to
Entourage
TM
User Manual for instructions.
STEP 1:
With jump seat in folded position, hold
seat vertically just in front of rear frame. Align
attachment notches on jump seat to hubs on
rear stroller frame. Slide seat down and back
until jump seat clicks into place.
STEP 2:
Ensure upper notches secure to rear
frame on left and right sides. Jump seat is now
attached and in its stowed position.
TO REMOVE JUMP SEAT: Ensure jump seat is
in stowed position.
STEP 1:
Locate strap on underside of jump seat
inside fabric opening. Pull strap up vertically to
release seat from stroller frame.
STEP 2:
Lift seat upward.
2
1
Jump Seat Use
Jump Seat Installation
1
2
1
Jump Seat Operation
1
2
TO DEPLOY JUMP SEAT:
Lift lever on underside of seat
and lower seat until it locks into
place.
TO STOW JUMP SEAT:
Lift lever and move seat into a
vertical position until it locks
into place.
Always lock brake when stroller is not moving and when making
adjustments.
WARNING
2
