Austin Hughes Electronics Cyberview NCP-1716 User Manual Download | Manualshive

Page: 50 / 60

background image

Firmware can be easily upgraded via web page. This section describes the upgrade procedures.
*Pls contact you The latest firmware version is available on the web site.

6.3.1 Prepare Upgrade Environment

1. Need to obtain a TFTP server software program.

2. Startup tftp server (e.g., tftpd32). The website below kindly provides the software.

http://perso.orange.fr/philippe.jounin/tftpd32_download.html.

3. Run the TFTP server software program, for example: tftpd32.exe

4. Select the directory folder where the upgrade image files reside at

For example: Z:\IP-console\Release\v1.0 & 082306

6.3.2 Upgrade from web page

Key in TFTP server IP address and image file name, then click Apply.

After a few seconds, the message Flash program finished successfully will be shown, meaning the new
firmware has been upgraded into the Flash memory.

6.3 Fireware Upgrade

Chapter 6

P.46

Warning :

During this upgrading process, we should not disconnect the power or the Ethernet cable, since it
may cause upgrade failure and destroy the image in Flash memory. In this case, we have to upgrade
through bootloader process, which is not as friendly as the web method.

Note :

There are three possible images can be upgraded. But not all of the three images should be upgraded
in each release. Most often, only need to upgrade the ramdisk image. The three images are:

■

extpar

■

zimage

■

ramdisk

«
...
48
49
50
51
52
...
»

Summary of Contents for Cyberview NCP-1716





























































Reviews:

No comments

Related manuals for Cyberview NCP-1716

Brand: KitchenAid Pages: 6

Brand: KitchenAid Pages: 20

Brand: KitchenAid Pages: 16

24" (61 cm) Warming Drawer

Brand: KitchenAid Pages: 12

Brand: KitchenAid Pages: 11

Brand: KitchenAid Pages: 1

Brand: Atag Pages: 58

Brand: Sunex Tools Pages: 7

Brand: Sunex Tools Pages: 7

Brand: Cardini Pages: 11

Brand: DCS Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands