AUSTAR TECHNOLOGY (HANG ZHOU) CO., LTD.
g)
Select device “AU500” and enter PIN CODE ‘8888’.
The pairing process is completed. A bluetooth icon will appear on the right corner.
4.
Connect/Reconnect to phone
After the AU500 is switched on, it is in idle mode. It is waiting to be paired or connected
by phone. When the AU500 and the phone are disconnected, the AU500 will return back
to idle mode.
Connect to a phone for the first time:
If the phone you want to use with AU500 has not been paired and connected with
AU500 before, please pair them first. Refer to “3. Paring with a phone” about how to
do it.
After the phone is paired with AU500, you can connect your phone with AU500 now.
The actual process of how to connect varies for different mobile phones. For some
mobile phones, AU500 will be connected after the paring process immediately. For
others you should list all the paried bluetooth devices on you mobile phone and
select AU500 to connect. So please refer to the user’s manual of your mobile phone
about it.
Reconnect to a phone:
There are two ways to reconnect a used phone:
Manual:
After the AU500 is turned on, press the Multifunction Key once and the AU500
will connect the last phone connected, If the bluetooth function of that phone is
turned on.
You can also connect to AU500 through your mobile phone. The specific
process is determined by your mobile phone. So please refer to the user’s manual of
your mobile phone about this.
Automatic:
After the AU500 is turned on, AU500 will automatically reconnect the last
phone connected, If the bluetooth function of that phone is turned on.
To select the way of reconnect, enter “MENU->setup”, select “auto” or “manual”.
After the AU500 is connected with your mobile phone by the HANDSFREE profile, a “ ” will
appear on the screen indicating that your mobile phone is now connect with the car kit
through handsfree profile. And the AU500 is in standby mode.
A “Hello xxxxx” will appear on the screen where “xxxxx” is the bluetooth name of your
mobile phone.
