AUSTAR TECHNOLOGY (HANG ZHOU) CO., LTD.
Using the car kit
1.
Getting Started
For the first time using the AU500,please:
Charge the AU500 with the provided charger for 3 hours
Turn on the Bluetooth function on your mobile phone.
Notes:
Maximum charging time: 3 hours
Talking time: up to 10 hours
Standby time: upt to 200 hours
Low battery signals: “Battery low” is displayed.
Do not charge up to 24 hours
2.
Switch ON/OFF
Switch on AU500
Press and hold the Power button for 4 to 5 seconds until you hear a low to hign ‘dodo’
sound. The display will be on and release the power button.
Switch off AU500
Press and hold the Power button for 4 to 5 seconds until you hear a high to low ‘dodo’
sound. A meesage of “power off” will appear on the screen and the screen will turn off.
Then the car kit’s power is fully turned off.
AU500 has several power saving mode. Although some of the modes may not be
noticeable to you, the screen has power saving mode in which situation the screen’s
contrast will change to a very low level. It will return to its normal mode when you press
any buttons or when there is phone call coming.
3.
Paring with a phone
Before using the AU500. you must pair it with the mobile phone first. Once the AU500 and
the phone has paired, they store the ID of each other. Thus they can connect to each
other automatically. You can check, delete or rename the paried device in the devices list
of the mobile phone.
a)
Place the Bluetooth AU500 and the Bluetooth mobile within a distance of 1 meter.
b)
Switch on the Bluetooth mobile and enable Bluetooth feature.
c)
Turn on the AU500.
d)
Select “Menu” by pressing “<” , then use the “+” and “-” to select “setup”. Press”<”
to enter the submenu.
e)
Use “+” and “-” to select “Discoverable”, and press “<” to execute the command.
This will make the AU500 into discoverable state and a message of “paring….” Will
appear on the screen.
f)
On the Bluetooth mobile, searching for device, “AU500” will appear in the device list.
