YL-240 4500KG BASE PLATE CAR HOIST
Installation and operation manual
31
Make sure vehicle is neither front nor rear heavy and select the proper configuration for the vehicle to be lifted (symmetric/asymmetric) as
shown below. Center of balance should be midway between adapters
•
Always replace:
ALL FAULTY PARTS before lift is put back into operation.
•
Daily:
Make a visual inspection of ALL MOVING PARTS and check for excessive signs of wear.
•
Daily:
Check safety locks to ensure they are in good operating condition.
•
Daily:
Check cables and sheaves for wear. Replace worn parts as required with genuine parts.
•
Daily:
Inspect adapters for damage or excessive wear. Replace as required with genuine parts.
•
Weekly:
Lubricate all sheaves and rollers with general purpose oil.
•
Weekly:
Check all cable connections, bolts and pins to ensure proper mounting.
•
Monthly:
Check equalizer cable tension. Adjust per lift installation instructions.
•
Monthly:
Lubricate locking latch shafts. Push latch handle several times for oil to penetrate pivot points.
•
Every 3 Months:
Check anchor bolt torque. Anchors should be torqued to 90 ft/lbs.
•
Semi-Annually:
Check fluid level of lift power unit and refill if required per lift installation instructions.
WARNING
PH 1300 232 153
HIGHLIFT
