background image

3

Contents

Preparation for Assembly ..............................................3

Packing Lists

Model 67C3C8KK81 .....................................................4

Assembly Instructions

Step 1  Caster Assembly ............................................5
Step 2  Back Panel to Bottom Shelf Assembly.............5
Step 3  Cart Frame Assembly.....................................6
Step 4  Cyl. Blocking Wire & Cyl. Retaining Bolt Assy. 6
Step 5  Front Crossbar & Caster Cap Assembly ..........7
Step 6  Door Handle and Door Assembly ..................7
Step 7  Hood/Body To Cart Assembly ........................8
Step 8  Side Table Assembly ......................................9
Step 9  Side Burner Valve Assembly ......................... 10
Step 10  Side Burner Igniter Wire Connection ............ 10
Step 11A Side Burner Control Knob Assembly ............ 11
Step 11B  Side Burner Grid Assembly .......................... 11
Step 12A Bottom Body Panel Assembly ....................... 11
Step 12B Foil Pan/Grease Pan Assembly ..................... 11
Step 13A Warming Rack Assembly .............................. 12
Step 13B Flame Diffuser Assembly ............................. 12
Step 13C Cooking Grid Assembly ............................... 12
Step 14  Battery in Igniter Installation ........................ 12

Connecting/Disconnecting the Gas

Using Gas .................................................................. 13
LP Gas Cylinder .......................................................... 13
LP Hose & Regulator ................................................... 14 
Connecting LP Gas Cylinder ....................................... 14
  Disconnecting LP Gas Cylinder ............................... 14

Before Using Your Grill

Installation Codes ....................................................... 15
Selecting a Location ................................................... 15

How to Perform a Leak Test ........................................ 16
Lighting Grill Using the Pulse-Spark Ignitor ................ 18
Manually Lighting the Grill .........................................20
Lighting the Side Burner ............................................. 21
Check the Flame ........................................................ 21
Manually Lighting the Side Burner ..............................22

Cooking on the Gas Grill

Grill Cooking (Direct Method) .....................................23
Roasting (Indirect Method) ..........................................24
Warming Rack ............................................................25
End of Cooking Session ..............................................25

Care and Maintenance

Cleaning the Grill ....................................................... 26
How to Clean the Burners .......................................... 27
Storage  

....................................................................29

Emergencies ............................................................30
Troubleshooting.......................................................30
Important Notice- LP Cylinder with OPD ...............32
Replacement Parts

Parts Illustrations ........................................................34
Parts List ...........................................................................35

Limited Warranty

.......................................................36

Register your grill and retain your receipt.

Preparation for Assembly

Remove Grill and all the packaging from carton and place on floor. Make sure there are no loose parts.

NOTE: Before using your grill, read the instructions and your manual.

For easier set-up and assembly, follow instructions of each step in the order they are written as you look at the dia-
grams. If accessories mentioned in certain assembly steps do not come with your model, skip that step and proceed to 
the next step that applies to your model. 

If you have any questions or need help, contact 

Customer Service at 1-800-251-7558

 or go to 

www.aussiegrills.

com

. Be sure to have the grill model number and serial number printed on the black label, located on the back edge 

of the bottom shelf of the cart. If you need replacement parts, look in the Parts List Section to find the exact parts you 
need. 

If you need a replacement part under warranty, a proof of purchase will be necessary

. You will be 

asked to forward your proof of purchase via e-mail or to fax your proof of purchase to 423-639-1055 and reference 
your model and serial number. 

It is important to register your grill and retain your receipt.

Summary of Contents for Vantage 67C3C8KK81





































Reviews: