9
Attaching the Grill to the Hanger Bracket
Place the assembled Hanger Bracket onto the hanger rail mounted to the side of the RV. Verify a proper and secure fit
of the bracket on the rail before attaching the grill to the bracket. Place the grill legs in their “folded” position. Keep the
grill supported until it is secured to the bracket.
A.
Pull the front Leg Brackets away from the U-Tube as far as the threaded studs will allow.
B.
Rest the rear grill legs on the hanger bracket crosstube inside the leg brackets. Slide the grill to the rear until it stops
against the back of the leg bracket. Be sure that the bottom face of the leg is under the catch tab on the inside of the
leg bracket. (see detail)
C.
Lower the front of the grill and let the front legs rest on the U-Tube.
D.
Slide the front Leg Brackets tight against the U-Tube being sure the catch tab inside the Leg Bracket is on top of the
bottom face of the leg. Tighten the Leg Bracket Wingnutsecurely by hand. Verify that the grill is secured by firmly grasp-
ing the Hanger Bracket U-Tube at the front and, while holding down on the U-Tube, grasp the grill handle and try to
move the grill in any direction. The grill must be firmly locked in place before use.
Leg Bracket
Hanger Bracket
Crosstube
D
Detail
Catch Tab
Bottom leg face
under catch tab
A
B
C
To reduce risk of serious injury or death from fire or burn hazard:
•
Verify that the mounting rail attached to the RV is solidly attached per the manufacturer’s mounting instructions.
•
Also verify that the Hanger Bracket is securly hung on the rail with the bottom channel resting squarely on the side
of the RV and that the grill is locked in position on the Hanger Bracket before using.
•
If Hanger Bracket becomes deformed, bent or for any reason cannot be secured tightly to the mounting rail, do not
use, and replace Hanger Bracket.
WARNING
!
