background image

1300 663 868 | [email protected] | aussietraveller.com.au

BRISBANE SHOWROOM:

 11-15 Oasis Court, Clontarf QLD 4019 | 

MELBOURNE SHOWROOM:

 235 Barry Road, Campbellfield VIC 3061

1

PRODUCT INTRODUCTION

The Aussie Traveller range of folding 12 Volt single and double drop down steps are designed to used as high 

quality equipment which can help passengers get into a full range of Recreational Vehicles, including Caravans, 

Campers, Motorhomes and Emergency Vehicles. 
Ask Aussie Traveller about the full range of RV steps available.

DESCRIPTION:

 

࡟ 12 Volt, switch operated drop down step function providing safe access to recreational vehicles by 

reducing entrance step heights.

 

࡟ Easy to install.

Read this installation instruction 

thoroughly.

Incorrect installation or operation may void any warranty.

Incorrect use or operation may cause serious injury.

MODEL

CURRENT DRAW

PLATFORM SIZE (L×W) WEIGHT

Single Step

Idle

—5 Amp 

Fully Extending or Retracting

—14–18 Amp 550×200mm

6.9kg

Double Step

Idle

—5 Amp 

Fully Extending or Retracting

—14–18 Amp 550×200mm

9.5kg

STANDARD PACKING LIST:

1 × 12V Folding Step 

1 × Mounting Kit

Includes: 

4 × M8x50 Hex Bolts 

4 × M8 Washers 

4 × M8 Safety Nuts 

1 × In/Out Switch 

1 × Switch Cover Plate 

6 × Flat Connectors

1 × User Manual

Summary of Contents for Double Step










Reviews: