background image

10     |

Aussie Eco-Clean Super Indy Operating & Maintenance Manual - 

2020

The use of the H.P. cleaner must be considered according 

to the place where the washing is performed (for example: food 

plants, pharmaceutical plants, etc.)

Pertinent rules and safety conditions must be followed.

As  for  the  protection  against  electric  shock,  the  H.P.cleaner 

belongs to 

CLASS I

.

 

Do not direct water jets at your own body or others in order 

to clean clothes or shoes.

Do not tie the gun trigger in the 'on' position.

 

In the hot water H.P. cleaners a Diesel fuel burner is used 

for  water heating. The use of other fuels is dangerous.     

Before  starting  any  cleaning  or  maintenance  operation, 

disconnect  the  machine  from  the  electric  and  water  supply 

networks.

 

Periodically, at least once a year, have the safety devices 

checked by one of our service centres.

If the appliance is to be used in an enclosed space, install 

a flue gas extraction system and guarantee adequate ventila

-

tion.

 

The  hot  water  cleaner  must  be  supervised  while  it  is 

working.

Do not clog the openings or the ventilation grilles and the 

heat and smoke extraction systems in the hot water cleaners. 

 

Do not use the machine if the supply cable is damaged.

For the replacement of the damaged cable apply exclusively  

to one of our technical service centres.

The supply cable of this appliance must not be replaced by 

the user.

The electric power cable must never be under mechanical 

tension and must be protected against accidental crushing.

 

In case of damage or malfunction, switch off the applian-

ce (disconnecting it from the water main and from the electricity 

main via the omnipolar switch or by unplugging the plug in the 

case of water cleaners rated at less than 3 kW) without tampe-

ring with it.

Apply to one of our technical service centres.

 

The use of any electric appliance requires the respect of 

some basic rules:

• Do not touch the appliance with wet or damp hands or feet.

• Do  not  use  the  appliance  bare-footed  or  with  unsuitable 

clothing.

• Do not pull the supply cable or the appliance itself in order

to   disconnect the plug from the electric supply.

(For water cleaners rated at less than 3 kW fitted with plug).

The H.P. cleaner must not be used by children, teen-agers 

or incapable persons (under the influence of alcohol, etc.)

 

Use only original accessories that can allow   safe working 

of the appliance.

The flexible hose connecting the lance to the H.P. cleaner 

must not be damaged.

In case of damage, replace it immediately.

 

Hoses, connections and fittings for high pressure systems 

are very important to guarantee the safety of the H.P. cleaner. 

Use only original spare parts which have the manufacturer’s 

approval.

Do not use the H.P. cleaner when persons or animals are 

in the vicinity.

 

High  pressure  jets  may  be  dangerous  if  not  properly 

used.

The jet must never be directed at persons or animals, electric 

appliances or at the appliance itself.

Firmly as there will be a kick when the gun trigger is pulled. 

Hold the lance grip.

 

The use of the H.P. cleaner must be considered according 

to the kind of washing which must be performed.

Protect yourself against the ejection  of solid materials or corro-

sive substances by means of adequate protective clothing

GENERAL WARNINGS ABOUT  INSTALLATION AND USE

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

Summary of Contents for Eco Clean Super Indy





















Reviews: