background image

www.marketdirect.com.au   

    

Ph: 1300 494 494

57

Every 6 MONTHS / 5,000KM SERVICE

CHECKED

Hitch

• Check hitch bolts to 76Nm

Handbrake

• Check cable and adjust if necessary

Hand winch

• Check brake function and webbing

Suspension

• Lubricate and check bushes for excess movement.

 

• Torque bolts to 190Nm

Brakes

• Inspect and adjust. Check lining thickness and drum wear

Wheel bearings

• Remove, clean and re-lubricate. Inspect for wear and replace if necessary

Wheel Nuts

•  Inspect condition and torque to 125Nm (12mm studs) 

 

(140Nm 14mm studs alloy rims), (200Nm 14mm studs steel rims)

Tyres

• Inspect for abnormal wear, damage, and pressure

Lights

• Check all lights are functioning

Battery

• Check terminals and voltage at full charge

Seals

•  Check condition and correct latch/lock adjustment for correct 30-50% 

compression

General fixings

• Check all structural fixing are secure.

Seals & Latches

•   Check all seals on doors and hatches compress 30-50%. 

 

All seals in serviceable condition and free of damage.

Suspension

• Grease bushes and check for play.

 

• Check torque on suspension hanger bolts (190nm)

 

• Check retaining chain shackles tight.

Service Centre: 

M.D.C G.roup

Notes: 

M.D.C G.roup

Summary of Contents for XL13






















































































Reviews:

Related manuals for XL13