8
CONTINUOUS DRAINAGE OPTIONS
INSTALLING DRAINAGE HOSE
When using continuous drainage, the drain hose must be placed horizontally below the level
of the drainage hole. Avoid uneven ground and kinking the hose.
Drain hose
Back of the unit
Drain cover
Drain cover
Soft rubber
stopper
Drain cover
Drain hose
Drain cover
Drain hose
Drain hose
Bucket
1. To save having to periodically empty the water
tank, this unit can be configured for continuous
drainage. You can use the supplied drain hose
to connect to the continuous drainage connector.
2. Unscrew and remove the drain cover at the rear
of the unit.
3. Remove the soft rubber stopper. Put it into the
water tank for safe keeping.
4. Insert the drain hose through the hole of the
drain cover.
5. Connect the drain hose to the drain port.
6. Tighten the drain cover in clockwise direction
onto the rear of the unit.
7. Place the bucket on its original location.
The continuous drainage function can be started in the following steps when there is suitable
conditions for drainage near the dehumidifier.
