AUSA plus T 144 H, Manual

Page: 41 / 49

3.5.6 TRANSPORTING TOWED LOADS
The forklift can be equipped with a tow ball with a diameter of 50 mm as an option.
WARNING
Towed masses on flat ground must not exceed:
Trailer without brakes: 750 kg.
Trailer with brakes: 1250 kg.
WARNING
- Avoid attaching excessively heavy trailers.
- The load on the towing hook must never exceed 100 kg.
- Do not apply sudden translation movements due to the high risk of accidents.
- For safety reasons, do not tow trailers without an independent braking
system.
- Before reversing to secure a trailer, check that nobody is present between
the machine and the trailer. Those in charge of signalling must be located at
the safety distance and clearly visible for the operator.
3.6 Transport of the machine
3.6.1 TOWING A DAMAGED MACHINE
Towing the forklift is only advisable in cases of breakdown when there is no other
alternative, as this may seriously damage the hydrostatic transmission. Whenever
possible, it is recommended to repair the machine where it is halted.
It towing is obligatory, apply the following procedure:
- Tow for short distances and at slow speeds.
- Use a rigid towing bar.- Set the FNR switch to neutral.
- If possible, start the engine to assist with steering and braking.
- If this is not possible, release the negative brake to start the engine. To this end,
remove the rubber plug in the rear part of the hydraulic unit and place a M12
screw in the hole
(A) . Subsequently apply torque of 42 Nm to release the brake.
(fig. 2)
(fig. 1)
TAURULIFT T144H x4 Plus