AUSA D 201 RH, Operator'S Manual

Page: 27 / 80

D201RH / RHS / RHG / RHGS
25
Instrument Panel
(fi
g.
2)
(fi
g.
3)
(fi
g.
4)
(fi
g.
1)
A
B
C
D
E
F
G
H
I
J K L M
Q P O N

Starting switch (fig. 1).
To start the engine, see the section STARTING in this Manual.
A- In this position the ignition and the engine are switch off.
B- Ignition on. The engine preheating system and the indicator on the instrument panel
are activated for some seconds.
C- Starter. Turning the key to position (c) starts the engine.

Fuse box (fig. 2)
It is located on the right hand side of the instrument panel.
See the section
ELECTRIC DIAGRAM in this Manual to identify the number and
function of each fuse.

Instrument panel, switches: Operation (fig. 3)
D- Low beam / high beam lights switch (

) . The lights switch may be activated
(fig. 4) , position (2) in two positions, the first turns on the low beam lights and the
second will turn on the high beam lights.
E- Side lights switch (  ) . The switch has two positions, the first turns on the side
lights and the second turns on the low beam lights.
F- Turning indicators switch (

) . Pressing the right or left hand side of the switch
activates the indicators.
G- Rotating beacon switch . To switch on, press the button. To switch off, press the
button again.
H- Working lights switch (

) . To connect the operating lights turn on the switch.
I- Hazard warning lights switch (

) . To switch on, press the button and flashes.
To switch off, press the button again.
 Instrument panel, indicators: Operation (fig. 4)
J- Air filter warning light . This lights up when the air filter is dirty or clogged. The
filter element should be cleaned or replaced immediately.
K- Engine oil pressure warning light . When the ignition is turned on this lights up
then switches off when the engine is working. If this light comes on and a warning
signal is emitted while the engine is running, the engine must be switched off
immediately to prevent damage. Check the level and add oil where necessary.
L- Glow plug indicator light . This lights up when the preheating resistances are
working and heating the combustion chamber to the temperature required in order
to start the engine.
M- Battery charge warning light . When the ignition is on this lights up when the
alternator does not charge the battery and switches off when the engine speed
exceeds the idle speed. If this remains lit then stop the engine and verify.
N- Fuel reserve warning light . This lights up when the level of diesel in the tank falls
into reserve.
O- Fast gear indicator . This will be lit when the second gear is engaged (fast gear).
P- High beam indicator light (

) . This lights up when this type of lighting is
selected.
Q- Coolant temperature indicator . If this lights up, this implies that the engine
temperature is too high. Stop immediately to investigate the problem. It may due to
a low level of coolant, dirt in the radiator that the thermostat does not work correctly
or there is a breakage in the alternator belt.