Aurus PN-19RF, User Manual

Page: 4 / 5

www.auruslocks.com
F. Setting the Management card.

Input the current management password, Press “C”

You will hear a beep and the green light will start to flash.

Show the card which you want to add as the management card near the inductive zone.

You will hear a beep.

To continue adding more management card, continue to add after the beep.

You have Successfully added management card
Note: - you can add upto 3 management cards.
G. How to add the user card.

Show the management card one.

You will hear a beep

And the green light
will be turned on.

Show the management card again and the green light will start flashing.

Show the user card you want to add. This will be your User card.

You will hear a beep implying that you have successfully added the user card.

You can continue adding card if you wish to add more.
NOTE: - You can only add upto 27 user cards.
H. Delete all cards all cards:-

Input the current management password, Press
“C”
.

You will hear a beep and the green light will start to flash.

Press ok, Low voltage indicator will start to flash.

Input “00 + ok:,

You will hear a beep.

All cards are successfully deleted.
I. Delete a single user card:-

Show management card once.

You will hear a beep and the green light will turn on.

Show management card again.

The unlocking indictor will start to flash.

Show the management card the third time,

The low voltage indictor will start to flash quickly

Now show the user card you want to delete.

You will hear a long beep.