Installation
Camera LED indicator
□
The LED light next to the card compartment indicates
the function status of the camera by using different
colored LED lights.
- Flash slow in RED
:
AP Mode
- Remain in RED: P2P Mode
-
Green:
The unit is recording.
NOTE:
Before removing the micro card from the slot, please
press the mode button on the bottom of the
Nightwatcher for 3 seconds to stop the light from
turning – the “Mode” LED will flash orange. To resume
working, press the mode button once.
NOTE:
When OFF/REC button is pressed, remove micro card
within 30 seconds (now the LED will turn red after
micro card is removed from the slot).
□
Static mode
: this is a new option to allow the end-
user's or consumers to select between a motorized LED
head or a standard static directional light head. Press
the push-button for 3 seconds to stop the light turning,
the hidden LED will flash RED in Night Mode and flash
GREEN in ALL Day Mode in a quick flash pattern. To
resume working, press the push-button for 3 seconds
again.
□
Before removing the micro card from the card slot, please
press the mode button on the bottom of the Nightwatcher
for 3 seconds to stop the light from turning – the ‘Mode’
LED will flash orange. (To resume working, press the
mode button again.)
□
To remove micro card, open the card compartment using
the provided Allen key and push in Micro card to eject
then pull out.
□
For viewing and/or formatting, please slide the micro card
into the card adapter that has been provided. Then, slide
the card adapter into the card slot on your laptop.
Formatting the micro card
□
It is good practice to format the micro card each time it is
removed and files are viewed on your PC. Once the
necessary files have been saved to your computer,
please follow these steps for formatting.
To format the micro card
□
Please ensure that any required images are saved to an
alternative folder prior to formatting.
- Place micro card into the card adapter supplied
- Place the adapter in a spare card slot on your PC /
Laptop
- Right click on the micro card location
- Select Format
- Ensure the correct file system is selected FAT16
(or FAT) for SD and FAT32 for SDHC
- Select quick format
