Aurora TAVIS TAV-10, User Manual

Page: 23 / 56

18
USERS GUIDE
www.auroramm.com
In the case that TAVIS is mounted on a desktop 41” from the ground at a 30-degree tilt, the vertical optical range will be
46” to over 72”. Depending on the placement of the tablet, altering the tilt may be able to accommodate those who fall
short of the 46” mark.
Depending on the model of the desktop mount, you may be able to affix the mount onto the tabletop with metal screws.
This will provide a sturdier alternative to having a freestanding desktop mount.
Placing the Wall Mount
The WMT-1 wall mount is able to tilt up or down from its neutral position, allowing the end user to accommodate people of
many different statures. The wall mount is capable of being placed low and tilted up, perpendicular to the ground at a
medium height position, or tilted down at a higher angle. Each of those three default positions offers its own advantages
or disadvantages. If the wall mount is lower, it ensures that people of all heights will be able to take advantage of TAVIS’s
touch screen capabilities. If the mount is higher, the downward tilt will be able to scan people of all heights, but the touch
screen may be out of reach for some people.
For most purposes, we recommend mounting the WMT-1 at approximately 60” - 65” from the ground, with a slight tilt
downwards as a default. This will comfortably accommodate individuals from 3 feet tall to over 6 feet tall. Please use your
own discretion when placing the device in order to best accommodate your users.
Software Setup
1. The setup wizard will run when you first power on the device. Please read the disclaimer and click “Next” to continue.
2. Configure your network settings, if any.
3. Choose between Fahrenheit and Celsius. Then enter the maximum allowed temperature and whether or not to
require a face mask.
4. Calibrate your device by following the instructions on screen.
5. Set your 5-digit pin to access the security settings again in the future.
To access your settings again, click the “ ” in the bottom right corner and enter your pin. If you have not entered
your own pin, you can access the menu by entering the default value of “12345”.
Important
 Make certain all units are using the latest firmware by signing onto the customer portal at
www.auroramm.com
 Do not use VESA mounting screws longer then 5mm or damage may occur to unit. Do not use power tool
to affix the screen. Handheld screwdriver is best as to not over torque.