Continued on next page
1
*
ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER
Heavier paper, humidity or other than rate voltage may reduce capacity.
*
UNE FEUILLE DE PAPIER PLIÉE ÉQUIVAUT À DEUX FEUILLES
Le papier plus épais, l'humidité et une tension différente de la tension nominale peuvent réduire la capacité.
*
UNA HOJA DE PAPEL DOBLADA EQUIVALE A 2 HOJAS DE PAPEL
Si el papel es más pesado, si está húmedo a las tensión es otra, la capacidad puede disminuir.
Operating Instructions
Crosscut Paper Shredder
Installation
Operation
Warning
Troubleshooting
Maintenance
Limited Warranty
Sheet Capacity
10 sheets of
20lb. bond paper
*
Paper Entry Width
8.7" / 22.0 cm
Paper Shred Size
7/32” x 2 5/32” pieces
0.56 cm x 5.5 cm pieces
Credit Card & CD Capacity
1 at a time
Voltage
120V~60Hz 3.0A
Capacité de passage
à la fois
10 feuilles de papier
bond de 75g/m2 (20lb.)
*
Largeur d'entrée
22,0 cm (8,7 po)
Dimensions des déchets
en morceaux de 7/32” x 2 5/32”
en morceaux de 0.56 cm x 5.5 cm
Capacité de CD et
les cartes de crédit
les introduire un par un
Manuel de fonctionnement
Déchiqueteuse à coupe croisée
Installation
Fonctionnement
Avertissement
Dépannage des déchiquteuses
Entretien
Garantie limitée
Tension
120V~60Hz 3.0A
Capacidad de
destruccióna la vez
10 hojas de papel
de cartes de 20 libras
*
Apertura de la alimentación
8.7" / 22.0 cm
Tomaño de corte
en pedazos de 7/32” x 2 5/32”
en pedazos de 0.56 cm x 5.5 cm
Capacidad de CDs y
tarjetas de crédito
introdúzcalos en la ranura
uno por uno
Voltaje
120V~60Hz 3.0A
Instrucciones para operar
Máquina destructora de
documentos de corte transversal
Instalaciones
Operación
Avertencia
Solucionar Problemas de la
Máquina Trituradora
Mantenimiento
Garantía Limitada
INSTALLATION:
OPERATION:
ShredSafe™
technology is an added safety feature incorporated in this particular model. It is a
new technology where the shredder is able to detect forced entry and automatically cuts the power off,
preventing further shredding.
To begin shredding, locate the switch on the unit and select the “Auto” mode (FIGURE 2). The Green LED
light indicates the shredder is “On” and ready to use. Press the designated “push open” area on the handle
of the cover to tilt open and expose the paper feed slot (FIGURE 3).
The cover will click into a preset position for safe shredding.*
With the feed slot now open, you can shred sheets of paper or 1 credit card per pass (FIGURE 3).
When shredding is completed, you can press the designated “push close” area on the cover to tilt shut
the paper feed slot (FIGURE 4). It is recommended to have the paper feed slot closed when shredder in
not in use. This will prevent any objects from getting into the feed slot and accidentally shredded.
*Be sure to not tilt open the cover completely beyond the preset position, otherwise the
ShredSafe™ power cut off feature will be activated and the shredder will be inoperable.
2
Mount the shredder securely to the rim of the waste basket. (FIGURE 1)
A socket-outlet should be near the equipment and be easily accessible.
Connect the power cord to any standard 120 volt AC outlet.
This shredder includes a built-in safety mechanism that requires the shredder to be
correctly mounted on the supplied wastebasket.
It is not designed to operate with any other
wastebaskets. An activation switch located on the head unit automatically shuts off the shredder when it is
lifted or removed. The supplied wastebasket activates this switch, which allows the shredder to be operable.
Lining the wastebasket with a plastic bag will interfere and may keep the shredder from functioning.
Caution:
Crosscut shredders have very sharp exposed blades on the underside.
Use care when mounting the shredder on the wastebasket.
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
Summary of Contents for ShredSafe AU1014XA
Page 1: ......
