11
User Guide
Video Wall
The IPX-TC1 & IPX-TCW3 videowall mode has the ability to take in a 4K UHD signal and create a low
latency high quality videowall. It is important to note it does this without the use of the scaler as it relies
on the scaler and capabilities of the display. The way the mode works is by dividing the input resolution
by the amount of displays. For example, a 2x2 videowall will become four 1080p signals from a 4K UHD
signal. Please refer to the IPX User Guide when selecting the displays to be used with the IPX units.
The first step is to go to the Setup at the top and select Videowall Configuration. A box will appear to
enter a video wall up to 4x4. In addition, there are parameters for bezel compensation for a window pane
effect.
Once setup the Videowall page will show the available Encodes and Decoders. To the right will be the
representation of the Videowall. Drag each decoder to the right to its relative physical empty outline. This
allows the user to know where the physical box is located on the videowall. To make the route drag an
encoder to the decoder on the right. You can also drag an encoder below to the Wall Group or All
Displays for a more instant effect when it is one big image. There are also preset capabilities available
which make changing sources very easy.
