1
User Guide
Configure Set Parameter
Note: The HJ-PXC is controlled via Telenet Port 23.
Set console-box
’s parameter.
Command
config set ip4addr xx.xx.xx.xx netmask xx.xx.xx.xx gateway xx.xx.xx.xx
Return
ip setting will change to: ipaddr xx.xx.xx.xx netmask xx.xx.xx.xx
gateway xx.xx.xx.xx
Note
Change the IP address which is used for communicating with TX and
RX. The default IP is 169.254.1.1. It takes effect immediately after
receiving the command.
Command
config set ip4addr2 xx.xx.xx.xx netmask xx.xx.xx.xx gateway
xx.xx.xx.xx
Return
ip2 setting will change to: ipaddr xx.xx.xx.xx netmask xx.xx.xx.xx
gateway xx.xx.xx.xx
Note
Change the IP address which is used for Telnet/Web. The default IP is
192.168.11.243. It takes effect immediately after receiving the
command.
Command
config set webloginpasswd xxxxxx
Return
password for web modified
Note
Change the login password of web.
Command
config set restorefactory
Return
system will restore to factory settings now
Note
Reset the IP Control Box.
Command
config set shutdown
Return
system will shutdown now
Note
Shutdown the IP Control Box.
Command
config set reboot
Return
s
ystem will reboot now
Note
Reboot the IP Control Box.
Command
config set debuglog {on | off}
Return
debuglog will switch on/off
Note
Enable or disable the debug log.
Command
config set device alias hostname xxxx
E.g.:
config set device alias JPX-TX1-mac mydvd
Return
hostname’s alias is xxxx
Note
Set the Alias of the TX/RX. hostname format is ex {JPX-TX1 |
JPX-RX1}-mac
JPX-TX1 means a Tx, JPX-RX1 means a Rx, mac is the Mac
address of this Tx. Alias can’t use following delimiter like ‘,’
