8
User Guide
command-string can’t contain symbol “ and ”.
-b param, configure the RS232 parameter of TX/Rx and connected
peripherals, including Baud rate
、
Data bits
、
Parity and Stop bits.
E.g.:
-b 115200-8n1.
Parameters optional, it is 115200-8n1 by
default.
-r {on|off}, to add “Enter” or not following the command-string to
final peripherals. Parameters optional, it is on by default.
hostname1 hostname2 ..., indicates the destination, could be
multiple.
Notify
Proactive notification command.
Command
notify endpoint
{+ | -} tx/rx tx/rx {- | +} tx/rx tx/rx ...
Return
Note
Notify the third-party controller if any TX/RX is dropped out or
added.
Command device-name message-body
Command pass-through.
Command
Command device-name message-body
Return
Reply: the device process the command feedback
Note
Third-part controller or web ui request to pass through message-
body to other device.
