Aurora AU3456, Manual

Page: 4 / 15

AU
3456 ENG
4
Electric Multifunction cooker
BEFORE FIRST USE
Make sure the inside multicook no packing materials or
foreign objects. Install the appliance on a dry, flat and
heatresistant surface, away from heat sources. do not
place the product in close proximity to the wall or fur-
niture. do not place anything on the cover multicook.
do not block the air vents. Clicking on the button, open
the lid and remove the bowl. rinse with warm water
and detergent all removable parts: a steam valve, bowl,
spatula, ladle, measuring cup, for steaming tray. dry
them. housing multicook wipe with a damp cloth and
wipe dry. do not start cooking until you are sure that
the removable bowl is set to multicook correctly.
BEFORE COOKING
To determine the amount of grits, use a measuring
cup, which is included in the kit Multicook. Pour the
water in accordance with the number dimensional
glasses, but remember that all the grains absorb water
in different ways. do not fill the bowl more than 60%
of its total volume. Make sure that the products are
evenly distributed throughout the bowl. Outlining the
cup Multicookings ingredients that have the ability to
swell in hot water (rice, dry fruits) or allocate foam, re-
member that should fill the cup half its volume.
Multicook has 10 automatic programs: « Roasting »,
« Groats », « My recipe », « Pilaf », « Steam », « Soup », « Baking »,
« Milk porridge », « Stewing », « Yoghurt ». Press the « МЕНЮ »
button many times as necessary to select one of the 10
automatic cooking programs, while, at each of the se-
lected program will light up led. Once a program
is selected, press « СТАРТ ». While working with the pro-
gram « На пару » must use the tank steamers. In a bowl
pour the water into the container, place the products in
the container set the cup and close the lid. When work-
ing with the program « На пару ,» the countdown begins
until the water boils and the formation of a sufficient
amount of steam.
EXPLOITATION
Press the « ВРЕМЯ » using the «+» key and «–» to select the cooking time. «+» Button is used to increase the
cooking time, the button «–» to decrease the time.
SETTING THE TIME OF PREPARATION
After selecting a program, you can change the cook-
ing temperature. Press the « ТЕМП » with the buttons
«+» and «–» to select the desired cooking tempera-
ture. «+» Button is used to increase the cooking
temperature, the button «–» to decrease the tem-
perature. Changing the cooking temperature (ex-
cept yoghurt program). After selecting one of the
10 automatic programs, or while it is running, press
the “ ТЕМП ” button. By pressing the “+” button to in-
crease the temperature by pressing the “–” button to
decrease. After setting the temperature, the value is
saved automatically within 2 seconds.
SETTING THE COOKING TEMPERATURE
ATTENTION! Keep the steam valve, every time after cook-
ing clean it. It does not carry the unit during operation.
Use the carrying handle after removing the product
from the mains by removing the bowl with products
and giving the product to cool. If the product was
some time at temperatures below 0ºC, before switch-
ing it should be kept indoors for at least 2 hours.