Aurora AU 4470, Instructions Manual

Page: 12 / 15

AU
4470 ENG
12
Electric
Induction cooker
BUTTON TIMER / PRESET
after pressing the ON/OFF button, press TIMER/
PRESET. This feature allows you to cook foods at a
given power setting with the necessary time of the
instrument. Press the TIMER button the display will
show the cooking time
0:00
. Use the “ - ” “ + ” to set
the desired time. The timer can be set from
0:00
minutes to
3:00
hours. You can also set the de -
sired delay time from
0:00
to
24:00
hours.
BUTTON ELEC / VOLT
During operation of the device, when you press
the ELEC/VOLT button, you can see the energy
consumption of electric appliance.
CHILD LOCK BUTTON
This feature prevents the inadvertent use of the
product. To set this function, press and hold the
CHILD LOCK button for three seconds. To disable
this feature, press and hold the CHILD LOCK but -
ton for three seconds.
PAUSE BUTTON
This feature allows you to set a break during
cooking. all settings are saved. If you press the
Pause button to continue cooking processes.
CONTROL PANEL
• ATTENTION! Do not block the air vents.
• ATTENTION! For cooking, do not use glassware,
ceramics, aluminum. Utensils should not be less
than 12 cm in diameter and thickness of the bot -
tom 2 to 6 mm.
• ATTENTION!
Do not carry the product during
operation.
• ATTENTION! To avoid accidents, make sure that
between the dishes and the working surface was
no paper, fabric or aluminum foil.
• The work surface may be damaged if dropped
on it any objects or cookware. Working surface
can be scratched by moving on it a cast-iron or
cast aluminum cookware or cookware with dam -
aged bottom. Do not move the dishes on the
work surface. Do not boil the liquid from utensils
to avoid damaging the work surface.
• If during cooking you remove the dishes from the
working surface, tile will automatically turn off.
• If the product was for some time at temperatures
below 0 ºC, before switching it should be kept in -
doors for at least 2 hours.
Use of iron, steel (enameled steel) kitchenware,
cookware with a ferromagnetic bottom, or spe -
cial utensils for induction cookers. Cookware
made of aluminum, copper, heat-resistant glass
and other non-magnetic materials are not suit -
able for use on an induction stove. Note that the
thicker and smoother bottom, the less energy
will be spent on cooking.
RECOMMENDATIONS FOR THE USE OF THE
DISHES
It is recommended to use utensils with a continu -
ous flat bottom. The diameter of the pan should
match the size of the heating surface.
COOKWARE FOR INDUCTION HOB
Install the tiles on a dry, flat, level surface that is
strong enough to withstand the weight of the tile
with dishes and products. Connect the product
to the mains. Place in the center of the working
surface of the tile suitable for induction cook -
ware. Press the ON / OFF button. If crockery is
suitable, a beep sounds. Use the FUNCTION set
the desired cooking program.
WORK