3
ENG
Please read this manual carefully before using the product to avoid
damage during use. Before switching on the product, make sure that
the technical specifications of the product shown on the label corre-
spond to the parameters of the electric network. Incorrect use can lead
to damage of the product, cause material damage or cause damage to
the health of the user. Use only for household purposes in accordance
with this Manual. The product is not intended for commercial use. Use
the product only for its intended purpose. Do not use the product near
the kitchen sink, outdoors and in rooms with high humidity. Always un-
plug the product from the electrical network when it is not in use, as
well as before assembly, disassembly and cleaning. The product must
not be unattended while it is connected to the electric network. Make
sure that the power cord does not touch the sharp edges of furniture
and hot surfaces. To avoid electric shock, do not attempt to disassemble
or repair the product by yourself. When disconnecting the product from
the electric network, do not pull on the power cord, hold the plug. Do
not twist or wind the cord. The product is not designed to be operated
by an external timer or a separate remote control system. The product
is not intended for use by persons with reduced physical, sensory or
mental abilities, or if they have no experience or knowledge, if they are
not controlled or instructed about the use of the device by the person
responsible for their safety. Do not allow children to use the product
as a toy. Do not use accessories that are not included in the delivery
suite.
ATTENTION!
Do not allow children to play with plastic bags or
wrapping film. THREAT OF SUFFOCATION!
ATTENTION!
Do not use this
product outdoors.
ATTENTION!
Be especially careful if children under 8
years or people with disabilities are close to the product in use.
ATTEN-
TION!
Do not use this product near combustible materials, explosives,
or self-igniting gases. Do not install this product near a gas or electric
stove, or other heat sources. Do not expose the product to direct sun-
light.
If the product has been kept for a while at a temperature below
0ºC, it must be left at room temperature for at least 2 hours before
switching it on.
ATTENTION!
Do not handle the power cord and the
power cord plug with wet hands.
ATTENTION!
Do not allow children
under 8 years to touch the body, the power cord and the plug of the
power cord while the product is in operation.
ATTENTION!
The power
cord plug has a wire and a grounding prong. Connect the product only
to a properly grounded socket.
ATTENTION!
To avoid overloading the
electric network, do not connect the product with other powerful elec-
trical appliances to the same electric network.
CAUTION!
Do not touch
the moving parts of the product.
CAUTION!
Be careful when using filter
knives of the grater - they are very sharp.
CAUTION!
In the case of me-
chanical damage to the grater, the operation of the juicer is prohibited.
CAUTION!
Before turning on the product, make sure that the cover is
securely fixed with a latch. The juicer is equipped with a safety system
that does not turn on the motor if the cover installed incorrectly.
FOR-
BIDDEN!
To push products with your fingers. Use a special pusher for
this purpose. If the food pieces are stuck in the intake neck, unplug the
product from the mains, remove the top cover and clean the neck.
FOR-
BIDDEN!
Removing the top cover while the product is in operation, and
if the power plug is plugged into an electrical outlet. The operating time
should not exceed 1 minute with a further break of at least 3 minutes
between operations.
CAUTION!
The juicer is not intended for making
juices from bananas, apricots, mangoes, papayas. The juicer can not be
used to produce juices from coconuts and other particularly solid fruits
and vegetables.
ATTENTION!
For additional protection in the power
circuit, it is advisable to install a residual current device with a rated
operating current not exceeding 30 mA. To install the device, contact
a specialist.
SECURITY MEASURES
Unpack the product and remove packing material. Wipe the case
and all the accessories carefully with a soft, slightly damp cloth.
Wipe them dry after.
ASSEMBLY
Before assembly, make sure that the product is dnot connected to
the electrical network, while the speed control is in the “0” position.
Install the pallet unit on the body of the motor unit. Secure the float
filter in the seat. Install the top cover and fasten the lock. Place a con-
tainer to collect the pulp under the cover, and a suitable container
for the juice - under the spout. Connect the product to the power.
PREPARATION FOR WORK
Before cleaning, make sure that the product is switched off and dis-
connected from the electric network. Wash all removable parts with
warm soapy water. Do not use the dishwasher for this. Do not use
metal brushes, abrasive cleaners, or solvents for cleaning. Clean the
motor unit body with a damp cloth. Do not immerse the motor unit
in water. Removable plastic parts of the juicer can be painted with
some products, for example, carrots. Therefore, after the work is fin-
ished, immediately wash them with a small amount of non-abrasive
detergent, then wash and dry them thoroughly.
CLEANING AND CARE
Before storage, make sure that the product is disconnected from electric network. Complete all the requirements of the CLEANING AND CARE
section. Keep the product in a dry, cool place and out of the reach of children
STORAGE
Install the motor unit on a flat level, dry and stable surface. Before
starting work, make sure that the cover is securely fixed. Wash veg-
etables / fruits thoroughly. Remove peel and bones (cherries, pears,
etc.), cut into small pieces that will easily pass the loading neck. Con-
nect the juicer to the electric network and select the appropriate
speed:
Speed I:
for soft products (pears, strawberries, plums, grapes,
pumpkin, onions, cucumbers, garlic).
Speed II:
for hard products (ar-
tichokes, carrots, apples, peppers, beets, potatoes, pineapples, zuc-
chini, celery, spinach, dill, leeks). Putting products into the loading
neck is possible only during the rotation of the float filter, and press-
ing them with a pusher without effort. When the pulp container is
full, turn off the juicer and empty the container. At the end of work,
move the speed selector to the “0” position and disconnect the
juicer from the power.
OPERATION
This symbol on the product and packaging means that used electrical and electronic products, as well as batteries, should not be disposed of with house-
hold waste. They need to be taken to specialized reception points. For more information on existing waste collection systems, contact your local authorities.
Correct disposal will help to save valuable resources and prevent possible negative impact on human health and the state of the environment that may
result from improper handling of waste.
