10
User Guide
Presets
SAVE
1) Press SAVE for 3 seconds, the button will light, and the operation will be started.
2) Select from input & output number 1~8 as customized mapping 1~16 sets.
The LCD will show the mapping status of the pressed button.
3) Press ENTER to complete the operation. The current mapping will be saved.
Note: To discontinue the SAVE setting, please press the SAVE again. The operation
will be canceled when there is no activity for more than 3 seconds from last
button press.
RECALL
1) Press recall, the button will light, and the operation will be started.
2) Select from input & output number 1~8 as customized mapping 1~16 sets.
The LCD will show the mapping status of the pressed button.
3) Press ENTER to complete the operation. The mapping you have chosen will be
recalled.
Note: If want to discontinue the RECALL setting, please press the RECALL again.
The operation will be canceled when there is no activity for more than 3 seconds
from last button press.
Lock Mode
1) Press ENTER for 3 seconds will enable front panel locked.
2) Holding another 3 seconds will unlock.
3)
If locked and any button is pressed, LCD will state “Keypad Locked”.
4) During the lock mode, the LCD will show the mapping status.
Show Network Address
1)
Press ENTER to see units IP Address and Subnet Mask on the front LCD. It will show
for 3 seconds or until a user selects another function.
